Treasure Valley, Idaho · Putting Greens

Putting Green Installation for the Treasure Valley

Give your practice routine a place between the patio and the lawn.

Altavera Construction designs and installs custom backyard putting greens for homeowners across Ada, Canyon, and Gem counties, combining synthetic playing surfaces with planned slopes, cups, flags, and surrounding fringe. We evaluate shade, irrigation, ground conditions, and equipment access so the practice area fits the property.

  • Licensed & Insured in Idaho
  • Idaho Contractor License #6971895
  • Woman-Owned Business
Backyard putting green installation with cups, flags, and fringe beside mature trees in an Idaho yard
A compact synthetic putting green with subtle breaks and a surrounding fringe in a mature residential yard.

Ground, Water, and Ball Movement

Good putting starts below the surface

The challenge is a green that stays true because the ground below it does not move.

Soil across the Treasure Valley varies from lot to lot, and dense native ground or compacted fill in newer yards can limit how readily water leaves the soil. A putting green needs stable support beneath its subtle contours, because settlement can introduce a dip that changes both drainage and ball movement. We plan excavation, base compaction, and water outlets together, accounting for winter freezing and thawing rather than assuming synthetic turf alone will solve wet or uneven ground.

Mature trees and narrow lots make shade, leaf drop, roots, and equipment entry central to placement. Older yards often have established irrigation that deserves attention before a green takes over part of the lawn, and sloped lots bring runoff and any applicable HOA review into the discussion. If the practice surface will sit within a larger turf area, Altavera can coordinate the adjoining surfaces while preserving a distinct putting area.

How Altavera handles it

Altavera checks the proposed green, its perimeter, and the ground feeding water toward it, including sprinkler overspray, nearby heads, access routes, and surrounding grades.

What's Included

Putting Green Services Across the Treasure Valley

01

Synthetic Putting Surface and Breaks

We lay out the playing area around available space, preferred practice distances, and useful changes in direction. Contours and breaks are intentional, laid out for ball travel. Cup placement and flag positions belong in that layout from the beginning, so the finished green offers varied approaches without forcing awkward edges into a compact backyard.

Includes

  • Synthetic putting turf
  • Contour layout
  • Planned breaks
  • Cup placement
  • Cups and flags

02

Excavation, Base, and Water Management

We prepare the ground to support the proposed contours, checking existing grades and the soil exposed during excavation. Base material is compacted to provide firm support while allowing water to leave through a planned drainage arrangement. On lots with dense soil, fill, or incoming slope runoff, the preparation addresses those conditions before the playing surface covers them.

Includes

  • Site excavation
  • Grade preparation
  • Base compaction
  • Subsurface drainage
  • Perimeter runoff
  • Contour shaping

03

Fringe and Perimeter Edges

A surrounding fringe gives the putting surface a clear boundary and room for approaches. We plan edge elevations beside existing lawn, rock beds, or paving so the green meets adjacent areas cleanly without creating a low spot.

Includes

  • Fringe installation
  • Edge elevations
  • Lawn transitions
  • Rock bed and paving edges
  • Perimeter grading

04

Irrigation Adjustments Near the Green

Existing irrigation still needs to serve nearby planting areas. We review head positions, overspray, and access for adjustments, keeping surrounding vegetation in the plan while reducing unnecessary water directed onto the putting surface.

Includes

  • Sprinkler head review
  • Overspray reduction
  • Head adjustments
  • Coverage for nearby planting

05

Integration with a Larger Yard

A green can be the main project or one element of an outdoor renovation. We coordinate its location with patios, artificial turf, and sport court areas, leaving practical routes through the yard and space for other activities.

06

Outdoor Lighting and Fixtures

Altavera installs outdoor lighting and fixtures around the yard, with wiring routes planned during design so the work fits the build sequence around the green.

07

Planning in Phases

A putting green can be added as part of a phased yard plan. Phasing works as long as drainage, grading, and underground work go in first.

Wide backyard putting green with fringe beside a patio, with dry hillsides beyond the yard
A synthetic putting area beside a patio and open lawn, with dry hillsides visible beyond the yard.

Why One Team Matters Here

One outdoor team for the work around the green

A putting surface often changes more than the patch of yard it replaces, so Altavera coordinates the adjacent grading, irrigation, and landscape work within one scope and one point of contact.

  • 01

    Water routes are part of the layout.

    We examine runoff arriving from the rest of the property as well as water landing on the green. That broader view helps keep a carefully shaped practice surface from becoming the yard's collection point.

  • 02

    Underground work gets its place.

    Drainage routes and irrigation changes are coordinated before surface installation. For a combined yard project, that order lets the green's elevations align with the underground work and adjacent construction.

  • 03

    The perimeter gets equal attention.

    We consider how someone steps onto the fringe, retrieves a ball, or passes alongside the green. Nearby patio edges, planting beds, and shared play areas help determine the final boundary.

  • 04

    Responsibility stays clear.

    Altavera provides one scope and one point of contact for the coordinated outdoor build. The company is women-owned, licensed and insured in Idaho, with Idaho Contractor License #6971895.

From First Call to Final Walkthrough

How a Putting Green Comes Together With Altavera

Putting green base preparation showing compacted contours and an edge drainage trench
Compacted base contours and an open perimeter drainage trench during preparation for a backyard putting green.
  1. Step 1: Phone Consultation

    A free 15-minute call to talk through your putting green project and your lot, so we both know whether it is a good match. Book it any time at our consultation calendar.

  2. Step 2: Estimator Fit Review

    An estimator reviews the scope and site details, confirms the project fits what Altavera builds, and sets up an on-site visit if it does.

  3. Step 3: On-Site Estimate

    If the project fits, an on-site estimate examines access, trees and shade, exposure, irrigation, soil conditions, grades, and possible green locations before the layout is developed further.

  4. Step 4: Written Proposal

    You receive a written scope covering layout, materials, permit needs, and build order, ready to review before you commit.

  5. Step 5: Deposit and Scheduling

    A deposit locks a start on the calendar. Materials are ordered and the work is lined up around the build sequence.

  6. Step 6: Build in the Right Order

    Drainage and grading go first, underground utilities and irrigation second, hardscape and structures third, and landscaping and finish work last.

  7. Step 7: Final Walkthrough

    We walk the finished project with you, confirm everything works as intended, and close out the punch list.

Where We Build

Putting Greens Across the Treasure Valley

Altavera designs and installs backyard putting greens, with the base preparation, drainage, fringe, and irrigation work around them, throughout Ada, Canyon, and Gem counties. Choose your city for local details on soil, permits, and the yards we build in.

When a putting green needs a permit, Altavera pulls it and manages it with your city or county.

Planning more? See phasing an outdoor project or what drives outdoor project cost.

FAQ

Putting Greens FAQs: Treasure Valley, Idaho

How much does a backyard putting green cost in the Treasure Valley?

It depends on the site and the design, so an accurate number only comes after an on-site estimate. Green size, contour complexity, cup count, fringe coverage, excavation, base preparation, drainage, irrigation changes, and equipment access all shape the scope. Altavera prepares a written proposal after the on-site estimate, and third-party financing is available for projects up to $100,000.

Which cities do you install putting greens in?

Altavera builds across the Treasure Valley in Ada, Canyon, and Gem counties, including Boise, Meridian, Eagle, Nampa, Caldwell, Star, Kuna, Middleton, Garden City, and Emmett. We also serve the neighborhoods and communities within those cities.

Does synthetic putting turf get hot in summer?

Yes. Like any plastic, synthetic turf gets much hotter than natural grass in full sun. We talk through placement and shade during planning, and in some yards we recommend keeping nearby sprinklers that can help cool the surface in summer.

How do soil conditions and winter freezing affect putting green preparation?

Dense or compacted soil can restrict drainage, while freezing water can disturb inadequately supported ground. We evaluate the underlying soil and plan excavation, compaction, and drainage as a connected part of the installation. Water leaving the green also needs a suitable route beyond its edge.

What happens to irrigation beside a putting green?

Irrigation beside the green is reviewed so nearby planting areas can still receive water without unnecessary overspray onto the playing area. We check nearby heads and water movement before setting elevations, since the existing irrigation arrangement on the property matters. Flood irrigation, where present, needs particular attention to keep its route compatible with the proposed green.

Who handles permits and HOA review for a putting green?

When a putting green needs a permit, Altavera pulls it and manages it with the city or county. HOAs usually want to see a turf sample, and Altavera can provide samples and scope details for the submittal, so approval is in hand before construction proceeds. Permit needs are determined by the actual project scope.

Can a yard with mature trees accommodate a putting green?

Often, yes, if the available space, tree roots, and access support the proposed layout. We examine shade throughout the area, likely leaf accumulation, and the practical route for installation equipment. A narrower design may suit the lot better than a broad oval, and placement also accounts for paths around the green.

Can children and pets use a yard that includes a putting green?

Yes, a putting green can be planned within a yard shared by children and pets. We discuss where other activities happen, how people cross the space, and whether adjacent turf or open lawn should remain available. Synthetic turf drains on its own, but no infill eliminates pet odor, so areas pets use need to be kept clean and rinsed regularly.

Start Your Project

Bring Backyard Practice Into Your Yard Plans

Get a quote for a dedicated putting green or a coordinated yard renovation, and we will walk your property to examine the ground, drainage, and irrigation. From there, the layout, planned breaks, perimeter edges, and full scope are spelled out in a written proposal.

Prefer to talk? Call 208-314-9967 or try our instant quote.

Licensed & Insured · Idaho Contractor License #6971895 · Serving the Treasure Valley

Altavera Construction logo

We elevate outdoor spaces with professional planning, expert execution, and quality craftsmanship — because your outdoor space is an extension of your home, not an afterthought.

Elevated standards. Real integrity.

Idaho Contractor License ID #6971895  ·  Women-Owned Business

CONTACT

FOLLOW US

© Copyright 2026. Altavera Construction. All Rights Reserved.

3313 W Cherry Lane Suite 1053 Meridian, ID 83642